Ghillie
The "Ghillie" is a versatile blade designed to be a jack of all trades. There are three different blade lengths available for the Ghillie
The Ghillie Long which has a blades which is approximately 95mm and the Ghillie short is about 70mm.
The Handle is 110mm
The blade can be ground with either a flat grind which can be seen in the photo at the top of the page or with a Scandinavian grind which you can see below.
The Ghillie Long which has a blades which is approximately 95mm and the Ghillie short is about 70mm.
The Handle is 110mm
The blade can be ground with either a flat grind which can be seen in the photo at the top of the page or with a Scandinavian grind which you can see below.
The Blade steel is either O-1 tool steel or Sandvik 14C28N from time to time other steels are used and for those special blades Damasteel can be used. Blades thickness can also be to your preference. Generally blades are either 3mm or 4mm but 5mm blade widths can be made.
Above is an example that has been made from 3mm Sandvik 14C28N the scales have been made from toxic green acrylic which have had blue fibre liners added
|
The above example is made from 4mm O-1 tool steel the scales are Acrylic Back with white ripple and has been lined with orange G10.
|
Handle Materials,
I use a variety of materials for on my knives. Acrylics, Micarta, G10 and Wood. Wood is stabilised where possible with a thermosetting resin. This gives the wood a robust quality to allow for minimal expansion or contraction. It also allows for wood which otherwise cannot be used as it is too soft but has excellent patterning, such as wood that is spalted. Some woods cannot be stabilised, this can be due to the high oil content. These handles can be soaked overnight in either Danish or boiled linseed oil and allowed to dry.
I use a variety of materials for on my knives. Acrylics, Micarta, G10 and Wood. Wood is stabilised where possible with a thermosetting resin. This gives the wood a robust quality to allow for minimal expansion or contraction. It also allows for wood which otherwise cannot be used as it is too soft but has excellent patterning, such as wood that is spalted. Some woods cannot be stabilised, this can be due to the high oil content. These handles can be soaked overnight in either Danish or boiled linseed oil and allowed to dry.
Ghillie XL
The Ghillie XL is the newest member to the Ghillie range. It has a 5" blade and is made from either 4mm or 5mm steel. The knife in the pictures below has the addition of brass and black liners and a Drop dangler sheath. The basic model has no liners and comes with a standard classic belt sheath. various options are available look at the Price Guide page for ideas or the Contacts page to ask for any additional information.
|
|
|
Ghillie Long
The Ghillie Long has a 4" blade either with a Scandinavian grind or with a semi flat grind and a second bevel. Various options can be made and some are available Here
|
|
|
Ghillie Short
The Ghillie short is the smallest member of the range supporting a 3" blades. Again these knives are available in 3mm or 4mm steel.
|
|
|
For further enquires please use the contacts page.
And to see what is available have a look at the shop page.
And to see what is available have a look at the shop page.